Save

19%

On RRP

Fluke 1507 Insulation Tester **FREE ITEM**

£429.00 £347.49 Inc VAT: £416.99

Calibration Certificate

Add a 12 month Calibration Certificate

Description

Fluke 1507 Insulation Tester

When you need a low cost solution to general purpose insulation testing look no further than the Fluke 1507 Insulation Tester. The Fluke 1507 Insulation Tester is compact, rugged, reliable, and easy to use. With it’s multiple test voltages, it is ideal for many troubleshooting, commissioning, and preventative maintenance applications.

This special promo includes a FREE Fluke 323 Clamp Meter – limited time only and subject to availability

Additional features, like the remote probe saves both time and money when performing tests.

Fluke 1507 Technical Specifications

AC/DC Voltage Measurements
Range 600V
Resolution 0.1V
Accuracy 50Hz to 400Hz ± (% of Rdg + Digits) ± (2% + 3)
Input Impedance 3MΩ (nominal) < 100pF
Common Mode Rejection Ratio (1kΩ unbalanced) >60dB at DC, 50 or 60Hz
Overload Protection 600V rms or DC
Earth Bond Resistance Measurements
Range/Resolution 20Ω: 0.01Ω
200Ω: 0.1Ω
2000Ω: 1.0Ω
20kΩ: 0.01kΩ
Accuracy ± (1.5% + 3)
Overload Protection 2V rms or DC
Open Circuit Test Voltage >4V, <8V
Short Circuit Current >200mA
Insulation Specifications
Measurement Range 1507: 0.01MΩ to 10GΩ
Test Voltage 50V, 100V, 250V, 500V, 1000V
Test Voltage Accuracy + 20%, -0%
Short Circuit Current 1mA nominal
Auto Discharge Discharge time < 0.5 seconds for C = 1μF or less
Live Circuit Indicator Inhibit test if terminal voltage >30V prior to initialisation of test
Maximum Capacitive Load Operable with up to 1μF load
Measurement Accuracy 50V: ±(3% + 5)
100V: ±(3% + 5)
250V: ±(1.5% + 5)
500V: ±(1.5% + 5)
1000V: ±(1.5% + 5) to 2000MΩ, ±(10% + 3) above 2000MΩ
General Specifications
Maximum Voltage Applied to Any Terminal 600V AC rms or DC
Storage Temperature -40 to 60°C (-40 to 140°F)
Operating Temperature -20 to 55°C (-4 to 131°F)
Temperature Coefficient 0.05x (specified accuracy) per °C for temperatures < 18°C or > 28°C (<64°F or >82°F)
Relative Humidity 0 to 95% @ 10°C to 30°C (50°F to 86°F)
0 to 75% @ 30°C to 40°C (86°F to 104°F)
0 to 40% @ 40°C to 55°C (104°F to 131°F)
Vibration Random, 2g, 5-500Hz per MIL-PRF-28800F, class 2 instrument
Shock 1m drop per IEC 61010-1 2nd Edition (1m drop test, six sides, oak floor)
Electromagnetic Compatibility In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1: 1997)
Safety Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600V (CAT IV)
Certifications CSA per standard CSA/CAN C22.2 No 61010-1-04; TUV per standard IEC/EN 61010-1 2nd Edition
Batteries Four x AA batteries (NEDA 15A or IEC LR6)
Battery Life Insulation test use: Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000V into 1MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Resistance measurements: Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1Ω with a duty cycle of 5 seconds on and 25 seconds off
Size 5.0cm H x 10.0cm W x 20.3cm L (1.97″ x 3.94″ x 8.00″)
Weight 550g (1.2lb)
IP Rating IP40
Altitude Operating: 2000m CAT IV 600V, 3000m CAT III 600V
Non-Operating (Storage): 12000m
Overrange Capability 110% of range
  • Insulation test range from 0.01MΩ to 10GΩ
  • Test voltages of 50V, 100V, 250V, 500V and 1000V
  • Automatic calculation of polarisation index and dielectric absorption ratio
  • Compare (PASS/FAIL) function for repetitive tests
  • Includes remote probe for hard-to-reach testing applications
  • Live circuit detection – prevents insulation test if voltages above 30V are detected
  • Auto discharge of capacitive voltage
  • AC/DC voltage measurements from 0.1V to 600V
  • 200mA continuity test
  • Resistance measurements from 0.01Ω to 20kΩ
  • Auto power off switches the meter off when left idle
  • Large-size backlit LCD display
  • CAT IV 600V overvoltage rating
  • Powered by 4x AA alkaline batteries
  • Fluke 1507 Insulation Tester
  • Remote Probe
  • Test Leads
  • Test Probes
  • Alligator Clips
  • User Documentation

Fluke 1507 Datasheet

You may also like…