Showing 13–24 of 41 results
-
Save
47%
On RRP
Kewtech KT66EV Multifunction Tester & EV Adapter Kit
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£2,495.00 £1,329.00 Inc VAT: £1,594.80
Add to basket -
Save
48%
On RRP
Kewtech KT66EV Multifunction Tester & KEWEVA Adapter Kit
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£2,395.00 £1,250.00 Inc VAT: £1,500.00
Add to basket -
Save
35%
On RRP
Martindale ET4000 Multifunction Tester
- Dual red and green LED indicators for instant display of PASS/FAIL
- Built-in new third amendment Zs loop impedance tables and help screens
- Automatic polarity and wiring check upon connection
- Auto RCD and ramp tests with all results shown simultaneously on the same screen
- TRMS voltage and phase rotation measurements
- Fast, reliable high current and non-trip loop testing
- Insulation resistance testing at 50, 100, 250, 500 and 1000V
- Continuity testing at 200mA and 8.5mA
- Loop resistance and PFC calculations with dual display
- Auto RCD and ramp test - 10, 30, 100, 300, 500, 1000MA for AC, A, F and S RCDs
- Slimline remote start probe allows tests to be activated without touching the tester
- Graphical display with integrated help screens to guide through tests
- 300V CAT IV and 600V CAT III safety rated
- Handheld, comfortable design
£1,170.00 £760.50 Inc VAT: £912.60
Add to basket -
Save
35%
On RRP
Martindale ET4500 Multifunction Tester
- Dual red and green LED indicators for instant display of PASS/FAIL
- Built-in new third amendment Zs loop impedance tables and help screens
- Automatic polarity and wiring check upon connection
- Auto RCD and ramp tests with all results shown simultaneously on the same screen
- TRMS voltage and phase rotation measurements
- Fast, reliable high current and non-trip loop testing
- Insulation resistance testing at 50, 100, 250, 500 and 1000V
- Continuity testing at 200mA and 8.5mA
- Loop resistance and PFC calculations with dual display
- Auto RCD and ramp test - 10, 30, 100, 300, 500, 1000MA for AC, A, F and S RCDs
- Slimline remote start probe allows tests to be activated without touching the tester
- Graphical display with integrated help screens to guide through tests
- 300V CAT IV and 600V CAT III safety rated
- Handheld, comfortable design
- Three-wire earth resistance testing (requires optional ER2KIT/S)
- Mains rechargeable with in-car option (requires PSUHPAT12 car charger)
- Fully downloadable memory
- USB connection to PC for easy transfer into Martindale's included software*
- Rechargeable batteries
£1,484.00 £964.60 Inc VAT: £1,157.52
Add to basket -
Save
35%
On RRP
Martindale ET4500 PRO Multifunction Installation Tester Kit
- Red and green PASS/FAIL indicators
- Help menus at the press of a button
- Automatic polarity and wiring check upon connection for checking for dangerous wiring faults
- Fast and reliable high current and non-trip loop testing
- Continuity testing at 200mA and 8.5mA
- Insulation testing with 50, 100, 250, 500 and 1000V test voltages
- Test AC, A, F and S RCDs
- Test 10, 30, 100, 300, 500 and 1000mA RCDs
- RCD trip time, RCD auto and RCD ramp testing
- 3 wire earth resistance test
- True RMS voltage measurements
- Frequency measurements
- Phase rotation measurements
- Downloadable multifunction tester - connect via USB to PC to download testing information
- Upload site data etc directly to the tester using the included software
- CAT IV safety rated
- Powered by rechargeable batteries
£1,755.00 £1,140.75 Inc VAT: £1,368.90
Add to basket -
Save
41%
On RRP
Megger MFT-X1 Multifunction Tester
- Designed for testing EVSE Installations
- Automatic test sequences for EVSE RCDs
- Confidence Meter: indicates the confidence in the accuracy of the loop impedance result
- Troubleshoot and verify the installation and safety of industrial, commercial and fixed wiring installations
- Includes all the tests required to complete the necessary electrical certification for the aforementioned electrical systems
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Suitable for conducting full single- and three-phase compliant insulation testing
- Conduct single- and three-phase RCD testing between 10mA and 1A
- New non-trip loop impedance technology
- Test 10mA type AC and A RCDs
- Prevents RCDs from influencing total loop impedance values
- Non-trip loop impedance tests can be performed in eight seconds
- Confidence Meter improves reliability: digital ARC indicates the analytical process, and the measurement is continually monitored and adjusted in reference to the circuit noise
- Test EVSE RCDs
- 6mA DC test (requires OPTIONAL accessory) for testing EVSE RCDs
- Large, clear backlit display
- Digital/ analogue arc indicates fluctuating readings
- Dual digital readout: indicates the precise reading and the test parameters simultaneously
- Internal memory: capacity for 1000 readings
- Download measurements via Bluetooth
- Colour coded function controls
- No complicated screens
- No hidden menus
- Ambidextrous design: TEST and LOCK buttons on either side of the unit
- Automatic test start: frees up the user’s hands for holding probes
- Can stand independently
- Can be hung around the operator’s neck using the included neck strap
- Internal rechargeable batteries: recharge in under four hours
- Rubber over-mould for protection in tough environments
- IP54
- EN61010 CAT IV safety rated: can withstand accidental misuse and voltage transients
- Can be connected anywhere within the low voltage network on single and three-phase systems
- Visual and audible warning when hazardous voltages are detected
- Displays the voltage value when a live voltage is detected during insulation and continuity tests
- When the detected voltage exceeds a safe level testing will be stopped and a warning beep is issued
- A versatile, practical and reliable electrical tester
£2,290.00 £1,350.00 Inc VAT: £1,620.00
Add to basket -
Save
40%
On RRP
Megger MFT-X1 Multifunction Tester & EVCA210 Kit
- Designed for testing EVSE Installations
- Automatic test sequences for EVSE RCDs
- Confidence Meter: indicates the confidence in the accuracy of the loop impedance result
- Troubleshoot and verify the installation and safety of industrial, commercial and fixed wiring installations
- Includes all the tests required to complete the necessary electrical certification for the aforementioned electrical systems
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Suitable for conducting full single- and three-phase compliant insulation testing
- Conduct single- and three-phase RCD testing between 10mA and 1A
- New non-trip loop impedance technology
- Test 10mA type AC and A RCDs
- Prevents RCDs from influencing total loop impedance values
- Non-trip loop impedance tests can be performed in eight seconds
- Confidence Meter improves reliability: digital ARC indicates the analytical process, and the measurement is continually monitored and adjusted in reference to the circuit noise
- Test EVSE RCDs
- 6mA DC test (requires OPTIONAL accessory) for testing EVSE RCDs
- Large, clear backlit display
- Digital/ analogue arc indicates fluctuating readings
- Dual digital readout: indicates the precise reading and the test parameters simultaneously
- Internal memory: capacity for 1000 readings
- Download measurements via Bluetooth
- Colour coded function controls
- No complicated screens
- No hidden menus
- Ambidextrous design: TEST and LOCK buttons on either side of the unit
- Automatic test start: frees up the user’s hands for holding probes
- Can stand independently
- Can be hung around the operator’s neck using the included neck strap
- Internal rechargeable batteries: recharge in under four hours
- Rubber over-mould for protection in tough environments
- IP54
- EN61010 CAT IV safety rated: can withstand accidental misuse and voltage transients
- Can be connected anywhere within the low voltage network on single and three-phase systems
- Visual and audible warning when hazardous voltages are detected
- Displays the voltage value when a live voltage is detected during insulation and continuity tests
- When the detected voltage exceeds a safe level testing will be stopped and a warning beep is issued
- A versatile, practical and reliable electrical tester
£2,840.00 £1,715.00 Inc VAT: £2,058.00
Add to basket -
Save
42%
On RRP
Megger MFT1711 Multifunction Tester
- Insulation tests at 250V, 500V and 1000V
- 2 & 3 wire non-tripping loop test
- Auto RCD test
- Continuity and resistance range of up to 200mA
- Designed for tough environments and ultimate reliability
- Easy to operate whether your left or right handed
- Large crystal clear backlit display with dual digital readouts
- Visible and audible safety warnings when testing high-energy systems
- True-RMS function
£1,100.00 £635.00 Inc VAT: £762.00
Add to basket -
Save
42%
On RRP
Megger MFT1721 Multifunction Tester
- Insulation ranges from 100V, 250V, 500V and 1000V
- 2 wire phase to phase L-L 50 V ~ 500 V
- Tests Type B (DC) RCD's
- Hard moulded IP54 casing to protect your tester
- Continuity and resistance ranges from 15mA to 200mA
- Unique style for operating in any applications
- Colour coded rotary switches for easier use
- Large, crystal clear, dual display
- Visible and audible safety warnings to ensure your safety when testing
- Automatic start and True-RMS functions
£1,505.00 £875.00 Inc VAT: £1,050.00
Add to basket -
Save
44%
On RRP
Megger MFT1741 Multifunction Tester
- Comprehensive low voltage installation tester with a unique, patent-pending algorithm for earth loop impedance testing
- Built-in confidence meter: arc will decrease as the reliability of the reading increases
- Performs quick, repeatable 3-wire non-trip loop tests on noisy and quiet circuits
- Results are not affected by RCD and RCBO impedance
- 3-wire non-trip loop impedance tests will not trip a vast majority of RCDs
- Type B loop test option for performing 3-wire non-trip loop tests on circuits containing 30mA Type B RCD or RCBOs
- Ideal for conducting 3-wire non-trip loop tests on circuits including 10mA RCDs and RCBOs
- 2-wire non-trip loop tests (no neutral)
- High-speed 2-wire high current loop tests on unprotected circuits
- Continuity measurements
- Resistance measurements
- Frequency measurements
- True-RMS voltage measurements
- Insulation testing
- Earth electrode testing
- Single and three phase RCD testing
- Phase rotation
- Large, LCD display with dual parameter indication
- Internal memory
- Bluetooth communication
- Robust casing
- IP54, protected against water and dust ingress
- Safety rating of EN61010 CAT IV
- Audible and visual safety warnings for hazardous voltage levels
- Prevents testing when hazardous voltage levels have been reached
- Colour coded test selection
£1,900.00 £1,070.00 Inc VAT: £1,284.00
Add to basket -
Save
47%
On RRP
Megger MFT1741 PLUS Multifunction Tester EVCA210-UK EV EVSE KIT
- Troubleshoot and verify the functionality and safety of industrial, commercial and domestic fixed wiring installations
- Check EV charge points using the Megger EVCA210-UK (see below)
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Includes all the tests required to complete the relevant electrical certification
- Please see the table above for an overview of the MFT1741 ’s testing capabilities
- Visual and audible hazardous voltage indicators
- Stops testing if a hazardous voltage is detected during insulation and continuity tests
- NEW non-trip loop impedance technology
- NEW confidence meter
- NEW auto sequence for EV charge point RCDs
- Large, clear, backlit, dual-readout display
- Readings and test parameters are displayed in parallel
- Digital/ analogue arc for indicating fluctuating readings
- Colour-coded function controls
- Function controls reduce the possibility of selecting the incorrect function or range
- Does NOT include hidden or complicated measurement menus
- Ambidextrous design: TEST and LOCK functions on either side
- Automatic test start supports hands-free operation
- Supplied with a neck strap
- Stands independently
- IP54
- Powered by internal rechargeable batteries
- Approximate battery life: four hours
- Easy-to-use and ergonomic test instrument with an eclectic array of test functions
£2,549.00 £1,345.00 Inc VAT: £1,614.00
Add to basket -
Save
44%
On RRP
Megger MFT1741+ PLUS Multifunction Tester
- Designed for testing EVSE Installations
- Automatic test sequences for EVSE RCDs
- Confidence Meter: indicates the confidence in the accuracy of the loop impedance result
- Troubleshoot and verify the installation and safety of industrial, commercial and fixed wiring installations
- Includes all the tests required to complete the necessary electrical certification for the aforementioned electrical systems
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Suitable for conducting full single- and three-phase compliant insulation testing
- Conduct single- and three-phase RCD testing between 10mA and 1A
- New non-trip loop impedance technology
- Test 10mA type AC and A RCDs
- Prevents RCDs from influencing total loop impedance values
- Non-trip loop impedance tests can be performed in eight seconds
- Confidence Meter improves reliability: digital ARC indicates the analytical process, and the measurement is continually monitored and adjusted in reference to the circuit noise
- Test EVSE RCDs
- 6mA DC test (requires OPTIONAL accessory) for testing EVSE RCDs
- Large, clear backlit display
- Digital/ analogue arc indicates fluctuating readings
- Dual digital readout: indicates the precise reading and the test parameters simultaneously
- Internal memory: capacity for 1000 readings
- Download measurements via Bluetooth
- Colour coded function controls
- No complicated screens
- No hidden menus
- Ambidextrous design: TEST and LOCK buttons on either side of the unit
- Automatic test start: frees up the user’s hands for holding probes
- Can stand independently
- Can be hung around the operator’s neck using the included neck strap
- Internal rechargeable batteries: recharge in under four hours
- Rubber over-mould for protection in tough environments
- IP54
- EN61010 CAT IV safety rated: can withstand accidental misuse and voltage transients
- Can be connected anywhere within the low voltage network on single and three-phase systems
- Visual and audible warning when hazardous voltages are detected
- Displays the voltage value when a live voltage is detected during insulation and continuity tests
- When the detected voltage exceeds a safe level testing will be stopped and a warning beep is issued
- A versatile, practical and reliable electrical tester
£1,999.00 £1,120.00 Inc VAT: £1,344.00
Add to basket