You searched for fluke - The Calibration Centre

Showing 1–12 of 259 results

Save
18%
On RRP
Fluke 113 Utility Digital Multimeter
- VCHEK LoZ low impedance measurement function to simultaneously test for voltage or continuity
- True-rms for accurate ac measurements on non-linear loads
- A large backlit display allows for easy visibility in low-lit areas
- Record signal fluctuations using the Min/Max function
- Diode test for testing general-purpose germanium, silicon, and power diodes
- Integral holster with probe holders for easy storage
- Auto and Manual ranging for added user functionality
- Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
- The optional TPAK magnetic hanger allows the user hands-free flexibility
Original price was: £152.00.Current price is: £123.92. Inc VAT: £148.70
Add to basket
Save
19%
On RRP
Fluke 114 Electrician’s Digital Multimeter
- True RMS digital multimeter made for use by electricians
- 6000 count LCD display with integrated backlight and analogue bargraph
- AutoVolt: automatically detects AC or DC voltage
- LoZ: low input impedance prevents ghost voltages from interfering with testing accuracy
- Test AC/DC voltage to 600V
- Test resistance to 6MΩ
- Continuity test with integrated beeper
- Removable holster with integrated tilt stand
- MIN/MAX mode calculates the maximum or minimum value taken over a period of time
- Display hold - freezes the current value on the screen
- Automatic and manual ranging
- Low battery indicator
Original price was: £207.00.Current price is: £167.67. Inc VAT: £201.20
Add to basket
Save
19%
On RRP
Fluke 115 Field Service Technician’s Digital Multimeter
- True RMS digital multimeter made for use by electricians
- 6000 count LCD display with integrated backlight and analogue bargraph
- AutoVolt: automatically detects AC or DC voltage
- LoZ: low input impedance prevents ghost voltages from interfering with testing accuracy
- Test AC/DC voltage to 600V
- Test resistance to 6MΩ
- Continuity test with integrated beeper
- Removable holster with integrated tilt stand
- MIN/MAX mode calculates the maximum or minimum value taken over a period of time
- Display hold - freezes the current value on the screen
- Automatic and manual ranging
- Low battery indicator
Original price was: £253.00.Current price is: £204.93. Inc VAT: £245.92
Add to basket
Save
19%
On RRP
Fluke 116 HVAC Multimeter
- Ideal for the electrical and HVAC industries
- Built-in thermometer for use in HVAC applications
- Microamp mode allows testing of flame sensor
- Portable and lightweight digital multimeter
- Low input impedance makes sure ghost voltages don't interfere with readings
- Resistance, continuity, frequency and capacitance testing
- Large white LED backlit screen
Original price was: £295.00.Current price is: £238.95. Inc VAT: £286.74
Add to basket
Save
29%
On RRP
Fluke 116 Multimeter and 323 Clamp Meter Combo Kit
- Ergonomic design makes using the tester in one hand easy
- Large integrated screen features an LED backlight for using the tester in darkened conditions
- Built in thermometer
- Fluke 116 HVAC Multimeter Key Features
  - Ergonomic design makes using the tester in one hand easy
  - Large integrated screen features an LED backlight for using the tester in darkened conditions
  - Built in thermometer
  - Microamp function
  - Low input impedance function prevents incorrect results because of ghost voltages
  - Resistance, frequency, continuity and capacitance testing
  - MIN/MAX/AVG functionality
  - CAT III 600V safety rating
  Fluke 323 True RMS Clamp Meter Key Features
  - 400A AC current measurements
  - 600V AC and DC voltage measurements
  - True RMS AC/DC voltage and current measurements
  - Resistance measurements to 40kΩ with continuity detection
  - Slim, ergonomic design
  - CAT IV 300V/ CAT III 600V safety rating
  - Data hold button
Original price was: £434.00.Current price is: £308.14. Inc VAT: £369.77
Add to basket
Save
19%
On RRP
Fluke 116/62 MAX PLUS Technician’s Combo Kit
- Built in thermometer for HVAC applications
- Microamp function allows testing of flame sensors
- Low input impedance helps prevent false readings caused by ghost voltage
- Fluke 116 HVAC Multimeter Key Features
  - Built in thermometer for HVAC applications
  - Microamp function allows testing of flame sensors
  - Low input impedance helps prevent false readings caused by ghost voltage
  - Bright, backlit screen allows the tester to be used in darkened environments
  - Resistance, frequency, continuity and capacitance evaluations
  - MIN/MAX/AVG functions with elapsed time indication
  - Easy to use in just one hand
  - CAT III 600V safety rated
  Fluke 62 MAX Infrared Thermometer Key Features
  - Ergonomic design with trigger
  - Large screen with backlight
  - Dust and water resistant (IP54 rated)
  - 3 meter drop tested
  - Precise laser technology allows users to easily line up measurement points
  - MIN/MAX/AVG/DIF modes
  - Hi and Lo alarm functions
Original price was: £390.00.Current price is: £315.90. Inc VAT: £379.08
Add to basket
Save
19%
On RRP
Fluke 117 Electrician’s Multimeter with Non-Contact voltage
- Clear display bar graph updated 4 times per second
- Min-Max-Average recording mode with Mix/Max alert
- Auto-ranging and manual frequency measurement
- Backlit LCD screen
- Multiple testing types
- High quality Fluke product
- True RMS
- Non-contact voltage detection
Original price was: £304.00.Current price is: £246.24. Inc VAT: £295.49
Add to basket
Save
17%
On RRP
Fluke 117 PRV240 Kit – Multimeter & Proving Unit
- Built-in non-contact voltage detector
- AutoVolt technology – automatic AC/DC voltage selection
- Low input impedance prevents ghost voltage false readings
- Large white LED backlight for use in poor lighting conditions
- True RMS
- Measures 20A with 20A overload for 30 seconds
- Resistance, continuity, frequency and capacitance testing
- MIN/MAX/AVERAGE modes with elapsed time to record signal fluctuations
- Ergonomic design for comfortable, one-handed operation
- Compatible with Fluke magnetic ToolPak hanging straps (sold separately)
- CAT III 600V safety rated
- - Sources AC/DC steady state voltage to 240V
  - Single LED indicator for verification
  - Compatible with multimeters, clamp meters and two pole voltage testers
  - Voltage sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
  - Long battery life – 5000 tests on four AA batteries
Original price was: £402.00.Current price is: £333.66. Inc VAT: £400.39
Add to basket
Save
29%
On RRP
Fluke 1503 Insulation Tester
- Insulation testing range from 0.1MΩ to 2000MΩ
- 500V and 1000V insulation test voltages
- Remote test probe makes it easy to carry out repetitive or hard-to-reach testing
- Live circuit detection stops insulation testing if voltage more than 30V is detected
- Auto discharge of capacitive voltage
- AC/DC voltage measurements from 0.1 to 600V
- Resistance measurements up to 20kΩ
- Auto power off conserves the battery life when tester is left idle
- Large backlit display makes it easy to read back measurements regardless of lighting conditions
- CAT IV 600V overvoltage rating
- Runs on 4 x AA alkaline batteries
Original price was: £490.00.Current price is: £347.90. Inc VAT: £417.48
Add to basket
Save
29%
On RRP
Fluke 1507 Insulation Tester
- Insulation test range from 0.01MΩ to 10GΩ
- Test voltages of 50V, 100V, 250V, 500V and 1000V
- Automatic calculation of polarisation index and dielectric absorption ratio
- Compare (PASS/FAIL) function for repetitive tests
- Includes remote probe for hard-to-reach testing applications
- Live circuit detection - prevents insulation test if voltages above 30V are detected
- Auto discharge of capacitive voltage
- AC/DC voltage measurements from 0.1V to 600V
- 200mA continuity test
- Resistance measurements from 0.01Ω to 20kΩ
- Auto power off switches the meter off when left idle
- Large-size backlit LCD display
- CAT IV 600V overvoltage rating
- Powered by 4x AA alkaline batteries
Original price was: £633.00.Current price is: £449.43. Inc VAT: £539.32
Add to basket
Save
27%
On RRP
Fluke 1550C Insulation Resistance Tester (5kV)
- Portable, unique design with large-size digital and analogue display
- Test voltages of 250V, 500V, 1000V, 2500V and 5000V
- Measurement range up to 1TΩ
- Leakage current measurements from 1nA to 2mA
- Capacitance measurements from 0.01μF to 15μF
- Built in timer from 0 to 99 minutes
- Live circuit warning
- CAT III 1000V and CAT IV 600V safety ratings
- 99 record memory
- Automatic calculation of dielectric absorption (DAR and polarisation index (PI)
- Long battery life lasts for over 750 tests between charge
Original price was: £4,957.00.Current price is: £3,618.61. Inc VAT: £4,342.33
Add to basket
Save
27%
On RRP
Fluke 1550C/Kit Insulation Resistance Tester Kit (5kV)
- Test voltages up to 10 kV provides solutions for all applications
- CAT III 1000 V, CAT IV 600 V safety rating
- Voltage breakdown detection alerts the user that voltage is present and gives the voltage reading up to 600 V ac or dc for increased user safety
- Selectable test voltages in 50 V steps from 250 to 1000 V, and 100 V steps above 1000 V
- Measurements can be stored in up to 99 memory locations, with each location assigned a unique, user defined, label for easy recall
- Long battery life gives the user over 750 tests between charges
- Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) with no additional setup
- Guard system eliminates the effect of surface leakage current on high-resistance measurements
- Large digital/analog LCD for easy viewing
- Capacitance and leakage current measurement
- Ramp function for breakdown testing
- Resistance measurements up to 2TΩ
- Timer settings up to 99 minutes for timed tests
- 3-year warranty
Original price was: £5,464.00.Current price is: £3,988.72. Inc VAT: £4,786.46
Add to basket

01785 600 691 • enquiries@thecalcentre.co.uk

Search Results for: fluke

Price

Manufacturer

Price

Manufacturer

18%

Fluke 113 Utility Digital Multimeter

19%

Fluke 114 Electrician’s Digital Multimeter

19%

Fluke 115 Field Service Technician’s Digital Multimeter

19%

Fluke 116 HVAC Multimeter

29%

Fluke 116 Multimeter and 323 Clamp Meter Combo Kit

Fluke 116 HVAC Multimeter Key Features

Fluke 323 True RMS Clamp Meter Key Features

19%

Fluke 116/62 MAX PLUS Technician’s Combo Kit

Fluke 116 HVAC Multimeter Key Features

Built in thermometer for HVAC applications

Microamp function allows testing of flame sensors

Low input impedance helps prevent false readings caused by ghost voltage

Bright, backlit screen allows the tester to be used in darkened environments

Resistance, frequency, continuity and capacitance evaluations

MIN/MAX/AVG functions with elapsed time indication

Easy to use in just one hand

CAT III 600V safety rated

Fluke 62 MAX Infrared Thermometer Key Features

Ergonomic design with trigger

Large screen with backlight

Dust and water resistant (IP54 rated)

3 meter drop tested

Precise laser technology allows users to easily line up measurement points

MIN/MAX/AVG/DIF modes

Hi and Lo alarm functions

19%

Fluke 117 Electrician’s Multimeter with Non-Contact voltage

17%

Fluke 117 PRV240 Kit – Multimeter & Proving Unit

29%

Fluke 1503 Insulation Tester

29%

Fluke 1507 Insulation Tester

27%

Fluke 1550C Insulation Resistance Tester (5kV)

27%

Fluke 1550C/Kit Insulation Resistance Tester Kit (5kV)

Sign Up for Emails

Latest news on sales and products!

Designed by Choose Purple

Home

Categories

Information

Designed by Choose Purple